fred_cbr a écrit:h2o a écrit:bonjour
J'ai une question a la con pour les windows mobile sa va se faire?
J'aimerai bien aussi avec mon HTC HD mais ça n'a pas l'air
même pour l'iphone y a rien
pourquoi j'ai pas un android 
Modérateurs: Traducteur, Correcteurs, Dev.ps3a, Newser
fred_cbr a écrit:h2o a écrit:bonjour
J'ai une question a la con pour les windows mobile sa va se faire?
J'aimerai bien aussi avec mon HTC HD mais ça n'a pas l'air
pourquoi j'ai pas un android 
h2o a écrit:fred_cbr a écrit:h2o a écrit:bonjour
J'ai une question a la con pour les windows mobile sa va se faire?
J'aimerai bien aussi avec mon HTC HD mais ça n'a pas l'air
même pour l'iphone y a rienpourquoi j'ai pas un android
ddewbofh a écrit:Time for a quick update on my research.
From what I can find out about the X10 through config-files and /proc it looks like it uses the msm72k driver. By comparing that with the musb driver and looking at how PSFreedom uses musb it doesn't look impossible to get it running with the msm72k driver.
Right now I'm looking at how to get/set the device address and endpoint. Getting the endpoint name is pretty straight-forward but getting the physical address needed is slightly trickier. But I'll keep hammering away on it.
Warning: My attention-span is really short so odds are I'll keep working on this in bursts. So while there's a big chance I'll get it working soonish you shouldn't hold your breath.



[07:29] * @DrMon shakes KaKaRoTo's hand
[07:30] <@DrMon> Congrats mate
[07:30] <@KaKaRoTo> DrMon, worked?
[07:30] <@DrMon> We have success
[07:30] <@KaKaRoTo> yeay!
[07:30] <@KaKaRoTo> SUCCESS EVERYBODY!
<Battosai> Why KaKaRoTo deleted his MSM72K post on GitHub?
<redeath_> yer
<redeath_> bugger
<rickyc> does the flooding have to do with the earthquake some how/
<+KaKaRoTo> Battosai, because it's merged into master now that it's working
<redeath_> naa
<+KaKaRoTo> the branch was for development only
<rickyc> as shitty as nz is, it held up pretty well
<Battosai> Ok Thanks KaKaRoTox
1.
psFreedom for Open Desire 4.0.4
2.
3.
Requirements:
4.
HTC Desire running the Open Desire 4.0.4 rom - http://forum.xda-developers.com/showthread.php?t=768624
5.
enable psFreedom - http://klutsh.com/psFreeRom/enable-psfr ... -4.0.4.zip
6.
disable psFreedom - http://klutsh.com/psFreeRom/disable-psf ... -4.0.4.zip
7.
8.
HowTo:
9.
place both psFreedom zips on your SD card
10.
11.
To enable:
12.
reboot to recovery
13.
flash enable psFreedom
14.
reboot back to Open Desire
15.
16.
To disable:
17.
reboot to recovery
18.
flash enable psFreedom
19.
reboot back to Open Desire
Battosai94 a écrit:0. Pré-Requis
Desire avec la Rom Open Desire 4.0.4
Note : La Rom est disponible sur les forums de XDA : http://forum.xda-developers.com/showthread.php?t=768624
I. Installation
1. Télécharger les archives :
Activation psFreedom : http://klutsh.com/psFreeRom/enable-psfr ... -4.0.4.zip
Désactivation psFreedom : http://klutsh.com/psFreeRom/disable-psf ... -4.0.4.zip
2. Copier les archives sur la MicroSD
II. Utilisation
1. Passer en mode Recovery
2. Flasher "enable psFreedom" et redémarrer
III. Désinstallation
1. Passer en mode Recovery
2. Flasher "disable psFreedom" et redémarrer

tomobobo a écrit:I can confirm that this works with my nexus one on CM6 using this file:
hxxp://download738.mediafire.com/rfkkjb ... om.tar.gzp
and these instructions:
How to:
1. Place the file psfreedom.ko in the root of your memory card.
2. Place the file boot.img in the same directory that your Android SDK tools are installed.
3. Reboot phone into fastboot mode by holding down the trackball during the power up.
4. Using a command prompt or from a shell window type fastboot boot boot.img
5. Once the phone has booted, open a terminal emulator and then type su.
6. Go to your memory card (usually /sdcard) and run insmod psfreedom.ko
7. Connect your Nexus One to the PS3 and power the PS3 off completely, following the guide for PSJB - power on, push power and then quickly push eject. You will not see anything displayed on your Nexus One.
8. To verify that it worked, go to the games menu and check for "Install Package Files".
One of my PS3's froze on boot 3 times, it has an old kernel, that might be why it messed up, but my second ps3 booted up in "jailbreak" mode on the first try.
Thanks everyone! Happy Labor Day!
Battosai94 a écrit:0. Pré-Requis
Nexus One avec la Rom CyanoGenMod 6 (dispo sur XDA)
SDK Android installé sur le PC
I. Installation
1. Télécharger le fichier suivant :
http://download738.mediafire.com/rfkkjb ... om.tar.gzp
2. Décompresser l'archive sur le PC
3. Copier le fichier "psfreedom.ko" à la racine de la carte mémoire
4. Copier le fichier "boot.img" dans le répertoire d'installation du SDK d'Android
5. Redémarrer le Desire en mode FastBoot (maintenir la TrackBall vers le bas lors de l'allumage)
6. Exécuter la commande suivante dans l'invite de commande de Windows ou autre : fastboot boot boot.img
7. Exécuter la commande suivante sur le Terminal : su
8. Se placer dans le répertoire de la carte mémoire (/sdcard) et exécuter la commande : insmod psfreedom.ko
II. Utilisation
Connecter le mobile à la PS3 et faire la manip' habituelle






The ONLY Android Manager you'll ever need is nearing completion!

Bhaal a écrit:Tiens qberty refait parler de lui avec un ptit tweetThe ONLY Android Manager you'll ever need is nearing completion!
ah ah



Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 20 invités